Menu
HENAN MINE CRANE IM&EX CO.,LTD
Home Page:   
/

Grab Single Girder Overhead Crane

$product.photos[0]['name']
Authentication mark:
ccc
ce
For customized products, please fill out information and submit the form.
Lifting capacity:
  • 3t
  • 5t
Lifting height:
18m
Span:
7.5m
22.5m
Voltage/Hertz:
Job level:
  • A3
Sling available:
  • available_img available_img_active Grab bucket
Apply: Single girder grab overhead travelling crane is mainly used to grab sand, scrap iron, rubbish, coal some bulk materials, or solid some materials.
submit
consult
catalogue
  • Product Overview
  • Application Scenario
  • Certificate
  • Case

Single girder grab overhead travelling crane with grab spreader below the LDA base unit. There are several kinds of spreaders, grabs, electronic suction cups, hanging chains and so on.


LDZ type electric overhead single girder grab crane is a light lifting equipment with the lifting mechanism of electric grab,and it can travel on the rails with suitable structure,the whole crane has strong rigidity.

This type crane sit on the tall concrete pillars or mental supports,its shape looks like a bridge.Single girder overhead crane runs longitudinally along the rails laid on the elevated on the both sides.This is able enough to lift materials under the bridge without being hindered by the ground cargo.Single girder overhead crane is one of the most used and largest number of lifting machinery.


Control methods:

LDZ type single girder overhead grab crane mainly has two operation methods:ground control and air cabin control with closed model or open model;cabin can be installed on the right side or left side of crane according to the practical situation.And the direction of entering the gate has two forms:sideways and ends in order to satisfy the users' choice ,users' different conditions.


Product Configuration:

LDZ type single girder grab overhead crane mainly includes four parts:mental structure part(main beam and end beam,sometimes including traveling tracks),trolley and crane traveling mechanism,electrical control part and lifting mechanism.

 

1.Mental Structure Parts: main beam, end beams, traveling tracks;

(1)The main beam adopts the U-shaped groove formed by the steel plate,and then forms the box-shaped beam with the I-beam.The end beams are also rolled into the U-shaped groove with the steel plate,welded into the box-shaped end beams.The main beam and end beams are connected by bolts.

(2)We can supply traveling tracks and bus bar for clients according to customers' requirements.There have three methods of tracks' installation:Welding method; bolt fixing method; hook bolt method.

 

2.Traveling Mechanism: trolley traveling mechanism and crane traveling mechanism.

The traveling of electric wire rope hoist and crane is controlled separately;and traveling motors adopts soft-start squirrel cage with disc-brake;The traveling speed of them is about 20 or 30m/min.

 

3.Electrical Parts are equipped by famous international electrical brands,The power supply system of the single-girder bridge crane adopts "multi-level seamless sliding line".

 

4.Hoisting Mechanism:The hoisting motor adopts a large starting torque conical rotor Squirrel cage motor with disc brake; the hoisting mechanism uses light class grab.

Product Overview

Single girder grab overhead travelling crane with grab spreader below the LDA base unit. There are several kinds of spreaders, grabs, electronic suction cups, hanging chains and so on.


LDZ type electric overhead single girder grab crane is a light lifting equipment with the lifting mechanism of electric grab,and it can travel on the rails with suitable structure,the whole crane has strong rigidity.

This type crane sit on the tall concrete pillars or mental supports,its shape looks like a bridge.Single girder overhead crane runs longitudinally along the rails laid on the elevated on the both sides.This is able enough to lift materials under the bridge without being hindered by the ground cargo.Single girder overhead crane is one of the most used and largest number of lifting machinery.


Control methods:

LDZ type single girder overhead grab crane mainly has two operation methods:ground control and air cabin control with closed model or open model;cabin can be installed on the right side or left side of crane according to the practical situation.And the direction of entering the gate has two forms:sideways and ends in order to satisfy the users' choice ,users' different conditions.


Product Configuration:

LDZ type single girder grab overhead crane mainly includes four parts:mental structure part(main beam and end beam,sometimes including traveling tracks),trolley and crane traveling mechanism,electrical control part and lifting mechanism.

 

1.Mental Structure Parts: main beam, end beams, traveling tracks;

(1)The main beam adopts the U-shaped groove formed by the steel plate,and then forms the box-shaped beam with the I-beam.The end beams are also rolled into the U-shaped groove with the steel plate,welded into the box-shaped end beams.The main beam and end beams are connected by bolts.

(2)We can supply traveling tracks and bus bar for clients according to customers' requirements.There have three methods of tracks' installation:Welding method; bolt fixing method; hook bolt method.

 

2.Traveling Mechanism: trolley traveling mechanism and crane traveling mechanism.

The traveling of electric wire rope hoist and crane is controlled separately;and traveling motors adopts soft-start squirrel cage with disc-brake;The traveling speed of them is about 20 or 30m/min.

 

3.Electrical Parts are equipped by famous international electrical brands,The power supply system of the single-girder bridge crane adopts "multi-level seamless sliding line".

 

4.Hoisting Mechanism:The hoisting motor adopts a large starting torque conical rotor Squirrel cage motor with disc brake; the hoisting mechanism uses light class grab.

Application Scenario

Single girder grab overhead travelling crane is mainly used to grab sand, scrap iron, rubbish, coal some bulk materials, or solid some materials.


Single girder overhead crane is a main tool and equipment for mechanization and automation of processing in the modern industrial manufacturing and lifting transportation areas. Single girder overhead grab crane is mainly equipped with light class grab for grabbing and transporting materials,so this type crane mainly used for grabbing places such as lump coal, coke, slag, cement and so on.


The single girder grab overhead traveling crane plays a crucial role in various industrial applications, particularly in environments requiring the handling and transport of bulk materials. This 

versatile piece of equipment is specifically designed to effectively grab and move a wide variety of materials such as sand, scrap iron, waste, coal, and other solid bulk substances. 


In modern industrial manufacturing, the single girder overhead crane serves as a vital tool for enhancing mechanization and automation processes. It streamlines operations in lifting and 

transporting, ensuring that materials are moved efficiently and safely across work sites. Its primary feature is the light-class grab attachment, which is optimized for handling materials that 

are often challenging to manage manually.


One significant application of the single girder grab crane is in mining and aggregate industries where it is used to grab and transport lump coal, coke, slag, and cement products. The crane's

 ability to maneuver in tight spaces allows for the efficient organization and movement of these materials, thereby reducing labor costs and minimizing the risk of injury associated with 

manual handling. 


Additionally, this type of crane is commonly found in waste management facilities, where it is used to lift and transport rubbish and scrap metal. By automating the material handling process, 

the single girder grab overhead crane significantly boosts productivity and operational efficiency. Furthermore, its robust design ensures reliable performance even in demanding environments, 

making it an essential asset for companies looking to optimize their material handling capabilities. 


In summary, the single girder grab overhead traveling crane is an indispensable tool in various sectors, from mining and construction to waste management, where it facilitates the efficient 

handling and transportation of diverse bulk materials. Its operational efficiency not only enhances productivity but also contributes to a safer working environment.


Certificate

Case

form form

Get Quote

wechat wechat

Wechat

Wechat:

+86 16627702870